How Can I Set And Add An Rpdu - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
3.
----End

8.7.15 How Can I Set and Add an rPDU?

Prerequisites
One end of the straight-through cable has been connected to the COM, SER, or
RS485 port on the rPDU, and the other end has been connected to the COM port
on the ECC800-Pro collector, UIM20A expansion module, or ETH converter.
Context
Table 8-14 rPDU basic information
Model
PDU2000-32-1PH
-20/4-M1/CLEVER
PDU2000-32-1PH
-20/4-M1/HPX
MD-1324-2004
PN1-32I10-20E4G
-AV4
Issue 04 (2021-10-09)
Path Parameter
Communicati
ons Port
Device
Address
Click Test Connect to check whether the DC power supply is properly
connected to the ECC800-Pro.
– If the connection succeeds, click Confirm. The connected devices are
displayed in the Number of connected devices list.
– If the connection fails, check whether the device is properly connected to
the ECC800-Pro, whether the device and ECC800-Pro are running
properly, and whether the parameter settings are consistent with the
device parameters.
Vendor
Clever
HPXIN
Clever
HPXIN
Copyright © Huawei Technologies Co., Ltd.
Setting
Select COM1 from the drop-down list box.
NOTE
The setting example indicates that the DC
power supply is connected to the COM1 port on
the ECC800-Pro. If the DC power supply is
connected to another port, select the number of
the connected port.
In this example, Device Address is set to 1.
Set the device address based on the actual
situation.
Name Displayed
on the WebUI
PDU2000-M(C)
PDU2000-M(H)
rPDU-MPDU
rPDU-PN
8 FAQ
Eleventh and
Twelfth
Characters in
Device Barcode
a
FT
6B
FT
6B
319