Huawei SmartDC V100R021C10 User Manual page 112

ECC800 Data Center Controller
User Manual
Port
WAN2
LAN1 and LAN2
● In ECC800 V100R002C10 and earlier versions, the default IP address of port
● The WAN1 port IP address cannot be set to an IP address in any of the
● IP addresses for the WAN1 and WAN2 ports should not be set in the same
● In some customized scenarios, the default IP address for the WAN2 port is
● WAN ports support the Internet access and LAN ports support the intranet
Step 2 Configure the PC IP address and the WAN1 IP address in the same network
segment.
If the WAN1 port IP address is 192.168.8.10, subnet mask is 255.255.255.0, and
default gateway is 192.168.8.1, set the PC IP address to 192.168.8.12, subnet mask
to 255.255.255.0, and default gateway to 192.168.8.1.
Step 3 Set LAN parameters.
1.
2.
3.
4.
5.
Step 4 Set Internet Explorer parameters.
1.
Issue 04 (2021-10-09)
NO TICE
WAN_1 is 192.168.1.10.
following network segments: 192.168.0.x, 192.168.245.x, 192.168.246.x and
192.168.248.x.
network segment.
192.168.248.10. The default value may vary.
access. Connect the PC network port to the WAN1 port or LAN port on the
ECC800-Pro based on the access network.
NO TE
● If the ECC800-Pro connects to a LAN and a proxy server has been selected, perform
3.3 and Step 3.4.
● If the ECC800-Pro connects to the Internet, and the PC in a LAN accesses the Internet
over a proxy server, do not perform
access the ECC800-Pro.
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
(Optional) Click the Connections tab and select LAN settings.
(Optional) On Proxy server, clear Use a proxy server for your LAN.
Click OK.
When you use Internet Explorer for access, set Internet Explorer to ensure the
normal display of and operations on the WebUI. Choose Tools >
Compatibility View, and add the web access address to the compatibility
view.
Copyright © Huawei Technologies Co., Ltd.
Default IP Address
192.168.0.10
192.168.248.10 (FusionModule500/800)
192.168.248.10
Step 3.3 and Step
5 Power-On Commissioning
3.4. Otherwise, you will fail to
Step
100