Huawei SmartDC V100R021C10 User Manual page 121

ECC800 Data Center Controller
User Manual
Step 4 Add a mobile number to receive event notifications.
Figure 5-6 Adding a mobile number
Click Test to check whether the added mobile phone number is available. If it is available,
Successfully to send the test short message. is displayed. If it is unavailable, Failed to send
the test short message. is displayed. Check whether the mobile phone number is correctly set.
Step 5 Set the alarm notification delay parameter and the new alarm notification
parameter.
Issue 04 (2021-10-09)
NO TE
The mobile phone number is used only for configuring the SMS function and is not used for
other purposes. The phone number is encrypted during transmission in the ECC800-Pro to
ensure that the personal data of users is fully protected.
NO TE
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
109