Huawei SmartDC V100R021C10 User Manual page 205

ECC800 Data Center Controller
User Manual
Step 6 Click Start. A risk warning is displayed.
Step 7 Click OK. The system starts to initialize the disks.
----End
Verification
Step 1 Choose Local Configuration > Local Disk.
Step 2 View the RAID group status in the RAID Groups area.
If you select the RAID 5 mode, RAID 1 is created for the system partition (for
storing system data) and RAID 5 is created for the data partition (for storing
recordings). The disk in yellow in the following figure is a hot spare disk.
Figure 6-53 RAID group status of RAID 5
When multiple disks are configured, if NON-RAID is selected for the disks, RAID 1
is created for the system partition.
Figure 6-54 RAID group status of disks that work independently (multiple disks)
If only one disk is configured, RAID 0 is created for the system partition after disks
are initialized.
Issue 04 (2021-10-09)
NO TE
The server will be restarted during the initialization of disks. The process takes about 5 to
10 minutes.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
193