Huawei SmartDC V100R021C10 User Manual page 67

ECC800 Data Center Controller
User Manual
Item
Test button
(smoke sensor
test button)
E-label
Indicators
Table 3-47 Description of the indicators on the multi-functional sensor
Indicator
RUN
ALM
RF_Z
Issue 04 (2021-10-09)
Specifications
Supports the smoke sensor test.
Hold down the button for 3s to trigger a smoke alarm, and
release the button to stop the smoke alarm.
Supported
Color Name
Green Module
running
status
indicator
Red Alarm
indicator
Green Communicat
ion status
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Blinking at The multi-functional sensor
long successfully registers with
intervals the ECC800-Pro and the
software runs properly (the
indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at The multi-functional sensor
short fails to register with the
intervals ECC800-Pro or the
communication fails (the
indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
Blinking The indicator blinks at super
short intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s.
The cycle lasts for 10s.
Steady on A system failure alarm is
generated.
Off No system alarm is
generated.
Steady on No network parameters
exist, or a network is to be
created.
Blinking at A network is set up, and no
long node access is allowed (the
intervals indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
3 Device Description
55