Commissioning The Ivs1800; Setting Parameters On The Ivs1800 Webui - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
3.
4.
----End

6.5.6 Commissioning the IVS1800

6.5.6.1 Setting Parameters on the IVS1800 WebUI

Context
A default IP address has been configured for the IVS1800 before delivery. Modify
the IP address based on the actual network plan.
Procedure
Step 1 Check whether the network connection between the PC for logging in to the OMU
portal and the IVS1800 is normal.
If the device is just delivered or has just been restored to factory settings, ensure
that the PC for logging in to the OMU portal is directly connected to the IVS1800
and is in the same network segment as the IVS1800.
For the device that is just delivered or has just been restored to factory settings, its
network information is as follows:
●
●
●
Step 2 Enter https://
Issue 04 (2021-10-09)
Figure 6-61 Creating a user
Set Multi-point logins to a value greater than 2.
In the Assign Device View Rights area, select the cameras to be browsed and
queried by the user. Set other parameters based on the documentation
delivered with the equipment or the documentation obtained by referring to
the Preparing Documentation section, and click Finish.
IP address: 192.168.3.111
Subnet mask: 255.255.255.0
Gateway address: 192.168.3.1
IP address :8443 in the address box, and press Enter.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
200