Huawei SmartDC V100R021C10 User Manual page 293

ECC800 Data Center Controller
User Manual
Figure 6-118 Setting the system type
Step 3 Choose System Settings > System Parameters > Site Configuration, set Smart
module name, and click Submit.
Step 4 Set sound pickup parameters and check the camera status.
1.
2.
Issue 04 (2021-10-09)
Press the button on a sound pickup to change its status to blinking for 10
seconds and view the running information about the sound pickup on the
page.
Figure 6-119 Checking the blinking status
Locate the sound pickup based on the blinking status and set Device name
and Ahu model parameter for the sound pickup.
NO TE
Ahu model parameter is used only in the AHU scenario.
Table 6-70 Setting parameters
Menu Path
Monitoring > Pickup > Running
Parameters > Unhide All Advanced
Signals
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
Model Parameter
Compressor side sound model
Exhaust fan doorside sound model
Exhaust fan innerwall sound model
Supply fan doorside sound model
Supply fan innerwall sound model
Water pump side sound model
Other model
281