Huawei SmartDC V100R021C10 User Manual page 222

ECC800 Data Center Controller
User Manual
5.
6.
7.
8.
Step 4 Configure a recording policy.
1.
2.
Issue 04 (2021-10-09)
NO TE
– The driver protocol of IPC6325 and C3220 cameras is HWSDK.
– The IP address segment indicates the start and end IP addresses of cameras.
You can use IP Address and Vendor to filter the required cameras in the
camera search result and select the required cameras. Alternatively, you can
directly select the required cameras in the camera list. Then verify accounts.
The default password of the HWSDK protocol is HuaWei123.
Figure 6-72 Verifying accounts
Select the cameras to be added and click Next.
Click Finish.
Preview the live video. Choose System Management > Devices > Device
Management > Micro Edge on the iClient home page. Drag an added
camera to the live video pane. If the live video can be properly played, the
camera is successfully connected.
Choose System Management > Devices > Device Management > Micro
Edge on the iClient home page.
Right-click a device and choose Storage Management.
Figure 6-73 Selecting Storage Management
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
210