Huawei SmartDC V100R021C10 User Manual page 391

ECC800 Data Center Controller
User Manual
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Turn on or off aisle lights.
Table 8-51 Turning on or off aisle lights
Path
Monitoring > Aisle > AC
Actuator Group > AC
Actuator n > Running
Parameters
Monitoring > Aisle > AC
Actuator Group > AC
Actuator n > Controls
----End
Example
The following figure shows how to turn on or off the lights controlled by AC
actuator 2.
Figure 8-35 Turning on or off aisle lights
Follow-up Procedure
Set Set light mode to Automatic.
When a smart module actuator is configured, you need to set parameters for the
smart module actuator. The setting process is similar.
Issue 04 (2021-10-09)
CA UTION
Copyright © Huawei Technologies Co., Ltd.
Setting
Set Route 1 control mode to Light.
Set Set light mode to Manual.
Select Remote open scuttle, select ON or OFF as
required, and click Submit.
8 FAQ
379