Huawei SmartDC V100R021C10 User Manual page 152

ECC800 Data Center Controller
User Manual
6.
7.
Issue 04 (2021-10-09)
Figure 6-5 Adding access users
On the Authorization Information and Term of Authorization tab pages,
select access users whose access permissions are to be set, and set
Authorized Device, Authorization Mode, Cabinet Lock, Start time, and End
time.
– Access Actuator/FusionModule actuator: Select the authorized access
actuator for the user based on the actual requirements. For example,
select Access Actuator1 on the Access Actuator tab.
– Cabinet Lock: Select the E-LOCK or Fingerprint Lock authorized for the
user.
– Term of Authorization: Set Start time and End time.
Figure 6-6 Adding access permissions
NO TE
You can authorize and delete access users in batches.
Click OK to complete the task of adding access management settings.
On the Authorization Operations tab page, click Synchronize to Device,
select the modified access control devices, and click Start Synchronization.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
140