Pad - Huawei SmartDC V100R021C10 User Manual

Data center controller
Hide thumbs Also See for SmartDC V100R021C10:
Table of Contents

Advertisement

ECC800 Data Center Controller
User Manual
Indicators
Table 3-61 ETH converter indicators
Indicator
PWR
RUN
ALM

3.2.18 PAD

The PAD allows the wireless access from the data center management system. You
can monitor the equipment in the data center and environmental parameters in
real time over the app. The recommended model is T5-10.
Issue 04 (2021-10-09)
Color
Name
Green
Power input
status
indicator
Green
Operating
status
indicator
Red
Alarm
indicator
Copyright © Huawei Technologies Co., Ltd.
Status
Description
Steady on
The power input is normal.
Off
There is no power input.
Off
The power supply is
abnormal.
Blinking at
The ETH converter
long
successfully registers with
intervals
the ECC800-Pro and the
software runs properly (the
indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at
The communication fails or
short
the ETH converter fails to
intervals
register with the ECC800-Pro
(the indicator blinks at 4 Hz,
on for 0.125s and then off
for 0.125s).
Blinking
The indicator blinks at super
short intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s.
The cycle lasts for 10s.
Steady on
A system failure alarm is
generated.
Off
No system alarm is
generated.
3 Device Description
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecc800

Table of Contents