Setting Parameters On The Iclient - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Step 9 Create a user.
When connecting to the IVS1800 on the NetEco, you need to log in as a non-
admin user.
1.
2.
3.
4.
----End

6.5.6.2 Setting Parameters on the iClient

Prerequisites
The network communication between the IVS1800 and the camera is normal.
Procedure
Step 1 Install the iClient.
1.
Issue 04 (2021-10-09)
Log in to the OMU portal as user admin.
Choose User Management > Add User.
NO TE
When creating a user, you can select Enable account validity period and set Valid from
and Valid to to set the account validity period for the created user.
Set Multi-point logins to a value greater than 2.
On the User List page, click Permission Settings next to the new user, select
the cameras to be browsed and queried, set other parameters, and click Save.
Download the iClient.
You can obtain the iClient in either of the following ways:
Method 1 Obtain the iClient installation program from the OMU portal.
Log in to the OMU portal, click Client Download
upper right corner, and save the installation program to a local
directory.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
in the
206