Huawei SmartDC V100R021C10 User Manual page 175

ECC800 Data Center Controller
User Manual
Step 4 After entering the video information, click Confirm.
Step 5 In the Video Information list, click the link under the Link column and go to the
camera WebUI as prompted.
Step 6 For details about how to commission the camera and set parameters, see the
documents delivered with the device or the documents obtained by referring to
the "Preparing Documentation" section.
1.
2.
3.
Issue 04 (2021-10-09)
Preview the site situation in real time and check the camera coverage through
videos. Adjust the lens if necessary.
(Optional) Configure an SD card if the VCN or IVS1800 is not configured.
Choose Settings > Video/Audio/Image > Video, and set camera stream
type, primary stream, and secondary stream 1 parameters, as shown in the
following figures.
NO TICE
Set the encoding protocol to H.265.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
163