How Can I Modify Device Names Over The Ecc800-Pro Webui; How Can I Perform Operations On The App - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Procedure
Step 1 Choose System Settings > Alarm Parameter > Alarm Linkage.
Step 2 Select ECC800 for Device type, select Device Type or Device for Linkage type,
and click Confirm.
Step 3 Click Select in the Output Dry Contact list for AI/DI_1 DI alarm. On the Set Dry
Contact Outputs(ECC800) page, set DO to Yes and click OK.
Step 4 Click Select in the loudspeaker list for AI/DI_1 DI alarm. On the Please set the
sound(ECC800) page, set loudspeaker to Yes and click OK.
----End
8.40 How Can I Modify Device Names over the ECC800-
Pro WebUI?
Context
●
●
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Modify the device name.
Table 8-55 Modifying a device name
Path
Monitoring > System >
Smart ETH Gateway
Group > Smart ETH
Gateway 1 > Running
Parameters
----End

8.41 How Can I Perform Operations on the App?

Issue 04 (2021-10-09)
NO TE
Select ECC800 from the Device name list if you have selected Device for Linkage type,
and click Confirm.
When a device name does not correspond to the actual location or needs
optimizing, you can modify the device name over the ECC800-Pro WebUI.
The following describes how to modify the name of the smart ETH gateway.
Copyright © Huawei Technologies Co., Ltd.
Setting
Select Device name, enter the new name in the
text box as planned, and click Submit.
8 FAQ
384