Robot Management - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Signal Name
Onvif https
Choose Monitoring > System > ECC800 > Running Parameters > Unhide All
Advanced Signals > Channel Security Configuration.
Table 6-69 Channel security configuration
Signal Name
NetEco encryption
algorithm CBC
Transparent
transmission
encryption algorithm
CBC
Email channel TLS1.1
Web channel TLS1.1

6.16 Robot Management

Procedure
Step 1 Log in to the robot ECC800-Pro WebUI as an administrator.
1.
2.
Issue 04 (2021-10-09)
Use a network cable to connect the PC to the network port of the robot.
Enter https://192.168.248.10 in the address box of the browser on the PC,
and then press Enter to access the WebUI login page.
Copyright © Huawei Technologies Co., Ltd.
Signal Value
Enable/Disable
Signal Value
Enable/Disable
Enable/Disable
Enable/Disable
Enable/Disable
6 Feature Description
Description
Indicates whether to enable
ONVIF HTTPS. The default value is
Disable. Before setting this
parameter to Enable, ensure that
all ONVIF devices connected
support the ONVIF HTTPS function
and have the function enabled.
Description
Indicates whether to use the
encryption algorithm with the CBC
mode when connecting to the
NetEco.
Indicates whether to use the
encryption algorithm with the CBC
mode during transparent
transmission.
Indicates whether to use the
TLS1.1 protocol when sending
emails.
Indicates whether to use the
TLS1.1 protocol when logging in to
the WebUI or app.
275