Skylight Actuator - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Indicator
ALM
RF_Z

3.2.7 Skylight Actuator

The skylight actuator controls the rotating skylight on the aisle containment of
the smart module through the alarm linkage information from the fire
extinguishing system or the control information from the upper computer. The
skylight actuator supports E-labels and wireless networking (802.15.4).
Issue 04 (2021-10-09)
Color Name
Red Alarm
indicator
Green Communic
ation
status
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Blinking at The communication fails or
short the AC actuator fails to
intervals register with the ECC800-Pro
(the indicator blinks at 4 Hz,
on for 0.125s and then off for
0.125s).
Blinking The indicator blinks at super
short intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s.
The cycle lasts for 5s.
Steady on A system failure alarm is
generated.
Off No system alarm is generated.
Steady on No network parameters exist,
or a network is to be created.
Blinking at A network is set up, and no
long node access is allowed (the
intervals indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking The AC actuator is searching
intermittent for a network (the indicator
ly at super blinks at super short intervals
short for 0.5s and then turns off for
intervals 0.5s).
3 Device Description
50