ECC800 Data Center Controller
User Manual
----End
6.5.5 Commissioning the VCN
6.5.5.1 Initializing VCN510 Disks
Context
When the VCN510 is delivered to the site, recording data can be stored only after
you install and initialize the disks.
Procedure
Step 1 Log in to the OMU portal of the VCN.
Step 2 Choose Local Configuration > Local Disk.
Step 3 In the upper-right corner of the RAID Groups area, click Initial disk.
Figure 6-48 Initializing disks
Issue 04 (2021-10-09)
Figure 6-47 Setting the alarm linkage policy
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
189