Numbering Management For Power Distribution Devices In The Power Module - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
3.
Step 5 Choose Monitoring > System > Intelligent O&M System and view the running
information about the intelligent O&M system.
Figure 6-120 Viewing running information
Step 6 Choose System Settings > Predictive Maintenance and view the information
about the detection models supported by the ECC.
Figure 6-121 Viewing detection model information
Step 7 Choose System Settings > NMS Application > NetEco, set communications
parameters, and click Submit.
Figure 6-122 Setting communications parameters
----End
6.18 Numbering Management for Power Distribution
Devices in the Power Module
Prerequisites
●
●
●
Issue 04 (2021-10-09)
Choose System Settings > Video Management and check that the camera is
correctly connected.
The system type is changed to FusionPower6000.
Power distribution devices have been connected to the ECC800-Pro.
The power module plan view has been created, and the device positions in
the plan view are consistent with actual positions.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
282