Others - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
●
●
●
●
●
●

1.6 Others

●
●
●
●
●
Issue 04 (2021-10-09)
When moving the equipment by hand, wear protective gloves to prevent
injuries.
Move or lift the equipment by holding its handles or lower edges. Do not hold
the handles of modules (such as power supply units, fans, and boards) that
are installed in the equipment because they cannot support the weight of the
equipment.
Avoid scratching the cabinet surface or damaging cabinet components and
cables during equipment transportation.
When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
Choose a road with good conditions or sea for transportation to ensure
equipment safety. Avoid tilt or jolt during transportation.
Move the cabinet with caution. Any bumping or falling may damage the
equipment.
Exercise caution when shutting down the smart cooling product. Doing so
may cause equipment and room overheating, which will damage the
equipment.
Exercise caution when powering off the rPDU or PDU2000. Doing so may
affect the power supply to equipment, which will interrupt services.
Exercise caution when manually shutting down the UPS inverter for
transferring to bypass mode, or when adjusting the UPS output voltage level
or frequency. Doing so may affect the power supply to equipment.
Exercise caution when setting battery parameters. Incorrect settings will affect
the power supply and battery lifespan.
To protect loads during UPS upgrade, set the output to maintenance bypass
mode. To avoid load power failure or damage, ensure that the bypass input is
within the specified power supply range.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
10