How Can I Manage Webui Users - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Procedure
Step 1 Choose System Settings > System Parameters > Site Configuration, and check
whether System Type is consistent with the type of the smart module.
(Optional) If the system type is inconsistent with the type of the smart module,
perform the following operations. The system type FusionModule2000 is used as
an example.
1.
2.
3.
Step 2 Choose System Settings > System Parameters > Site Configuration, modify
Smart module name, and click Submit in the Site ID area.
----End

8.5 How Can I Manage WebUI Users?

Context
WebUI users are classified as Administrator and Operator. They have different
operation rights.
●
●
Issue 04 (2021-10-09)
so that maintenance engineers will know the site where the fault has
occurred.
NO TE
● By default, the system type displayed on the WebUI is the system type selected last
time. Change the system type as required.
● If the system type is changed, the monitoring software will restart and you can log in to
the WebUI again after 3 minutes.
Select FusionModule2000 from the System type drop-down list box.
Click Submit in the System Type area.
Figure 8-1 Setting the system type
Go to the Re-authentication page, enter the login user name and password,
and click Submit.
Administrator: The user name is admin and password is Changeme by
default. The administrator has all rights, including the rights for user
management, browsing and modifying all parameters in the system, software
upgrade, and data import and export.
Operator: The user name is operator and password is Changeme by default.
Operator has no rights for user management, system setting, version upgrade,
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
297