ECC800 Data Center Controller
User Manual
4.
5.
Step 5 Commission the cabinet electronic clasp locks.
Table 5-18 Function check
Function
View
cabinet
electroni
c clasp
lock
informati
on
Change
a cabinet
electroni
c clasp
lock
name
Remotely
open a
cabinet
electroni
c clasp
lock
Issue 04 (2021-10-09)
Table 5-17 Adding a cabinet electronic clasp lock
Path
Choose System Settings
> Device Management
and click Add Device.
The parameters for
adding devices are
displayed.
Click Test Connect to check whether the connection between the cabinet
electronic clasp lock and the ECC800-Pro is normal.
–
If the connection succeeds, click Confirm. The device connection
information is displayed in the Number of connected devices list.
–
If the connection fails, check whether the device is properly connected to
the ECC800-Pro, whether the device and ECC800-Pro are running
properly, and whether the parameter settings are consistent with the
device parameters.
Connect the electronic clasp locks of other cabinets.
Path
Choose
Monitoring >
Cabinet > IT
Cabinet101 >
E-LOCK1.
a
Choose
Monitoring >
Cabinet > IT
Cabinet101
Copyright © Huawei Technologies Co., Ltd.
Parameter
Device
attribute
Device Type
Connect To
Communicat
ions Port
Device
Address
Click the
Running Info
tab.
Click the
Running
Parameters tab.
Click the
Controls tab.
.
a
5 Power-On Commissioning
Setting
Cabinet electronic clasp lock
Cabinet electronic clasp lock
ECC800
COM1-COM3
Enter the actual device address of
the cabinet electronic clasp lock.
Operation
View the running information
about cabinet electronic clasp
lock 1 on the WebUI.
Change the cabinet electronic
clasp lock name.
Select Open front door or Open
back door from the Cabinet
door control drop-down list box,
and click Submit to remotely
open the door.
125