How Can I Synchronize Device Parameters - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Figure 8-23 Exporting information to PC
Figure 8-24 Exporting information to USB flash drive
----End

8.20 How Can I Synchronize Device Parameters?

Context
●
●
●
●
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose Maintenance > Parameter Sync.
Step 3 Select a value from the Device type drop-down list box.
Step 4 Specify source device and target device, click Submit.
If communication between the ECC800-Pro and the device is interrupted during
parameter synchronization, the synchronization fails. Ensure that the ECC800-Pro
and the device communicate properly and synchronize parameters again.
Issue 04 (2021-10-09)
Do not delete the source devices before replacing devices.
After replacing devices, you can choose to synchronize configured device
parameters to the target devices.
Source device: device before replacement
Target device: device after replacement
NO TICE
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
364