How Can I Set And Add A Netcol5000-A025 (Modbus-Mac) - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
3.
Step 2 Set the running parameters and control parameters for the NetCol5000-A042 on
the WebUI.
1.
2.
3.
4.
----End
8.7.19 How Can I Set and Add a NetCol5000-A025 (Modbus-
MAC)?
Prerequisites
One end of the straight-through cable has been connected to the FE_1 port on the
NetCol5000-A025 main control board, and the other end has been connected to
the PoE port on the ETH converter.
Procedure
Step 1 Set NetCol5000-A025 monitoring parameters.
1.
2.
3.
Issue 04 (2021-10-09)
Choose Settings > Comm Settings > Modbus Settings, and set Connection
mode to Server and client, Server encryption to Enable.
NO TE
After the NetCol5000-A042 parameters are set, the ECC800-Pro can automatically identify
the automatic access of the NetCol5000-A042.
Log in to the ECC800-Pro WebUI as an administrator.
Choose Monitoring > Cooling > NetCol5000-A0421.
NO TE
1 in NetCol5000-A0421 is variable and subject to change with the smart cooling
product model and connection sequence. The displayed value prevails.
On the Running Parameters tab page, set smart cooling product running
parameters.
On the Controls tab page, set the smart cooling product control parameters
(such as on/off control parameters).
CA UTION
After the smart cooling product is shut down, the temperature of the smart
module increases and data running is affected. Exercise caution when
performing this operation.
Enter the NetCol5000-A025 home page, click Settings, choose the user name
admin, and enter password 000001. After login, the settings screen of the
NetCol5000-A025 is displayed.
Choose Comm Settings > LAN IP Settings, set LAN IP assigning mode to
Automatic (DHCP), and click Submit.
Choose Settings > Comm Settings > Modbus Settings, and set Connection
mode to Server and client, Server encryption to Enable.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
326