Huawei SmartDC V100R021C10 User Manual page 30

ECC800 Data Center Controller
User Manual
Item
USB
SW button
Table 3-5 ECC800-Pro RF_Z parameters
Item
RF_Z operating
frequency
RF_Z EIRP (max.)
Issue 04 (2021-10-09)
Specifications
SMS service: Supports the 4G module, SMS sending, and 3G
communication, and provides a standard SIM card slot.
1. China: 2G and 4G networks support China Unicom or China
Mobile SIM cards, and 3G networks support only China
Unicom SIM cards.
2. Outside China: Select SIM cards according to the following
wireless modes and frequency bands:
● 4G: LTE-FDD, covering frequency bands B1, B3, B5, B7, B8
and B20; LTE-TDD, covering frequency bands B38, B40,
and B41
● 3G: WCDMA, covering frequency bands B1, B5, and B8
● 2G: GSM, covering frequency bands 900 MHz/1800 MHz
NOTE
● The prerequisite for using a SIM card is that the site has signal
coverage.
● Due to the performance limitation of the wireless module, China
Telecom SIM cards are not supported.
● Supports USB 2.0 and 5 V, 1 A power supply.
● After installing the WiFi module, connect the WiFi module
to the ECC800-Pro using the app on the PAD to view the
basic information about the smart module, such as layout,
resources, energy efficiency, environment, and alarms.
● You can insert a USB flash drive to export historical data
and configuration files and import configuration files.
● Restores the default IP address, factory settings, and user
information.
● Supports RF_Z (802.15.4) networking.
Specifications
2405–2480 MHz
8 dBm
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
18