Creating An Ecc800-Pro On The Neteco - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Path
Table 6-63 Setting the authentication password
Path
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Step 4 Click Submit.
----End

6.14.1.3 Creating an ECC800-Pro on the NetEco

Prerequisites
●
●
Issue 04 (2021-10-09)
Parameter
Network port
for link setup
NOTE
This
parameter is
not involved
in the
FusionModul
e500/800
scenario.
Parameter
Authenticatio
n password
Confirm
authenticatio
n password
You have logged in to the NetEco client using a web browser.
You have created modules in Data Center Planning.
Copyright © Huawei Technologies Co., Ltd.
Default Setting
Value
WAN_1 ● WAN_1: Connects to the NetEco
over the WAN1 port.
● WAN_2: Connects to the NetEco
over the WAN2 port.
● WAN_1/WAN_2: Both the WAN1
and WAN2 ports are connected
to the NetEco. The WAN1 or
WAN2 port is automatically
selected based on the real-time
network connection.
NOTE
If this parameter is set to WAN_1/
WAN_2, the IP address for
connecting to the NetEco is not
fixed. Therefore, the IP address is
displayed as 0.0.0.0, indicating auto
adaptation.
Default Setting
Value
Modifyme Set this parameter based on
_123 customer requirements.
NOTE
Requirements for setting passwords:
a–z, A–Z, 0–9, ~!@#^*_={}:,./?-`$ (8–32
characters that include at least three
of the following types: digits,
lowercase letters, uppercase letters,
and special characters)
- -
6 Feature Description
267