How Can I Set The Date And Time; How Can I Enable Or Disable An Alarm And Set The Alarm Severity - Huawei ECC500 User Manual

ECC500
User Manual

7.9 How Can I Set the Date and Time?

Prerequisites


Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose System Settings > Time Settings, as shown in
Figure 7-9 Setting the date and time
Step 3 Set the date and time, and click Submit.
----End
7.10 How Can I Enable or Disable an Alarm and Set the
Alarm Severity?
Prerequisites


Context


Issue 04 (2019-12-20)
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
Enable or disable an alarm and set the alarm severity depending on actual requirements.
If an alarm is set to Disable, the ECC500 will not report this alarm.
The setting methods for diverse alarms are the same. This section describes how to set
ECC500 network fault for System Equipment.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-9.
7 FAQ
75