Huawei SmartDC V100R021C10 User Manual page 295

ECC800 Data Center Controller
User Manual
Context
When multiple power distribution devices of the same type are connected to the
ECC, the management system can distinguish the devices by device No.
●
●
The default value of device No. is automatically generated based on the sequence
in which devices are added. You need to change the value based on the sequence
of power distribution devices. The setting rules are as follows:
●
●
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose Home > Plan View. The power module view is displayed.
Step 3 Click Modify Device, double-click the corresponding power distribution device,
and set Device No. based on the device number planned in the power supply and
distribution link diagram.
Figure 6-123 Setting the device No.
----End
Issue 04 (2021-10-09)
Identifiers of the transformer, SVG, APF, UPS, feeder cabinet, and lithium
battery cabinet: device type ID + device No.
Identifier of the low-voltage cabinet: device type ID + detailed model ID +
device No.
Transformer, SVG, APF, UPS, feeder cabinet, and lithium battery cabinet: If the
device types are the same, the start device No. is 1. The device No. increases
in ascending order based on the sequence of power distribution devices.
Low-voltage cabinet: If the device types and detailed models are the same,
the start device No. is 1. The device No. increases in ascending order based on
the sequence of power distribution devices.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
283