Huawei SmartDC V100R021C10 User Manual page 290

ECC800 Data Center Controller
User Manual
Figure 6-115 Configuring hotspot information
Step 4 Choose System Settings > NMS Application > NetEco, set Server IP and Port
number, select WIFI for Network port for link setup, and click Submit.
Figure 6-116 Setting communications parameters
Issue 04 (2021-10-09)
NO TE
● Password: password set for the router
● IP address: The first three digits must be in the same network segment as the IP address
of the WiFi hotspot. For example, if the router is connected, the first three digits must
be set to 192.168.10, and the last digit must be set to a value in the range of 150 to
254.
● Subnet mask: 255.255.255.0
● Gateway: The first three digits must be in the same network segment as the IP address
of the WiFi hotspot. For example, if the router is connected, the first three digits must
be set to 192.168.10 and the last digit must be set to 1.
NO TE
The default port number is 31220.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
278