How Can I Ensure That Device Positions In The Plan View Are Consistent With Actual Positions - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
----End
8.41.3 How Can I Ensure that Device Positions in the Plan
View Are Consistent with Actual Positions?
Prerequisites
The smart module plan view has been created, and the device positions in the
plan view are consistent with actual positions.
Context
The rack environment unit is used as an example.
Procedure
Step 1 Log in to the ECC800-Pro app as an administrator.
Step 2 Choose Home > More > iFind.
Step 3 Tap Cabinet Collector n Blink to deliver a blinking command. The corresponding
device in the smart module blinks. Check that the device positions and types in the
plan view are consistent with the actual situation by delivering the blinking
command.
Figure 8-40 Rack environment unit blinking
----End
Issue 04 (2021-10-09)
NO TE
– After the first login, change the password in time to ensure system access security.
– A password that has been used for a long time is more likely to be stolen or cracked.
The risk increases along with the time of use. Change the password once every three
months.
– It is recommended that you use different user names to log in to both the ECC800-Pro
WebUI and app at the same time. If you use the same user name to log in to the
WebUI and app at the same time, either of them will be forcibly logged out.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
388