Huawei SmartDC V100R021C10 User Manual page 208

ECC800 Data Center Controller
User Manual
7.
8.
Step 2 Enable camera NTP synchronization.
The camera NTP synchronization function for the server is disabled by default. The
camera NTP synchronization function needs to be enabled for the server that
connects to the camera. After the camera NTP synchronization function is enabled,
cameras will automatically time-synchronize from their access servers.
1.
2.
3.
Issue 04 (2021-10-09)
Figure 6-57 Setting the external IP address of the MU
NO TE
Set NatIP to the external IP address of the VCN, which is the same as the external IP
address mapped by the VCN on the ECC800-Pro.
Set Module name to OMU and click Search.
In the search result, click Edit in the row where the value of Parameter Name
is OMUNatIP and set Value to the NATIP address of the MU. Click Save.
Figure 6-58 Setting the external IP address of the OMU
Log in to the OMU portal of the VCN as user admin.
Choose Maintenance > Unified Configuration.
Select the server that the camera needs to access, set Module name to SCU
and Parameter type to System property, and click Search.
Figure 6-59 Configuring camera NTP synchronization
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
196