Huawei SmartDC V100R021C10 User Manual page 162

ECC800 Data Center Controller
User Manual
5.
6.
7.
Step 2 Set the IP address for the IPC6325 camera.
1.
2.
3.
4.
Issue 04 (2021-10-09)
Choose Settings > Network > Platform Connection > Second Protocol
Parameters, and select Enable ONVIF.
Figure 6-11 ONVIF parameters
Remove the network cable from the PC to the PoE port on the ETH gateway.
Connect the PC to the LAN1 port on the ECC800-Pro using a network cable,
and reconnect the network cable between the smart ETH gateway and the
LAN2 port on the ECC800-Pro.
Enter https://192.168.248.10 in the address box of the browser and press
Enter to access the WebUI login page. After login, choose System Settings >
Video Management.
(Optional) Click Search.
NO TE
– The search timeout interval is 10s. If the search fails, a search failure message is
displayed.
– To avoid missing cameras, you can perform Search for multiple times.
On the found camera record, click
camera based on the external IP address allocated by the network
administrator (PC IP address and camera external IP address should be in the
same network segment).
Click the link under Link to access and log in to the camera WebUI. Enter the
preset user name admin and the preset password HuaWei123, and click Log
In.
Figure 6-12 Clicking the camera access link
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
and set the external IP address for the
150