ECC800 Data Center Controller
User Manual
3.
4.
5.
----End
Issue 04 (2021-10-09)
Figure 6-77 Setting platform connection parameters ONVIF
Figure 6-78 Setting platform connection parameters GENETEC
Choose Settings > Intelligent > Common Intelligence > Motion Detection
> Area Parameters.
Select Enable, click Add, add motion detection areas, set motion detection
parameters, and click Save.
Figure 6-79 Setting motion detection parameters
If there are multiple cameras, repeat
Copyright © Huawei Technologies Co., Ltd.
Step 8.1–Step
8.3.
6 Feature Description
219