Huawei SmartDC V100R021C10 User Manual page 329

ECC800 Data Center Controller
User Manual
Step 2 Add a PDU8000 (Modbus-RTU).
1.
2.
3.
Issue 04 (2021-10-09)
Figure 8-9 PDU8000 communication settings screen
Log in to the ECC800-Pro WebUI as an administrator.
Add a PDU8000.
Table 8-12 Adding a PDU8000
Path Parameter
Choose Device
System attribute
Settings >
Device Type
Device
Management
and click Add
Connect To
Device. The
parameters
for adding
Communicati
devices are
ons Port
displayed.
Device
Address
Click Test Connect to check whether the PDU8000 is properly connected to
the ECC800-Pro.
– If the connection succeeds, click Confirm. The connected devices are
displayed in the Number of connected devices list.
Copyright © Huawei Technologies Co., Ltd.
Setting
Select PDU from the drop-down list box.
Select PDU8000 from the drop-down list
box.
Select ECC800 from the drop-down list
box.
Select COM1 from the drop-down list box.
NOTE
The setting example indicates that the
PDU8000 is connected to the COM1 port on the
ECC800-Pro. If the PDU8000 is connected to
another port, select the number of the
connected port.
In this example, Device Address is set to 1.
During actual configuration, set the device
address for the PDU8000 based on the
actual situation.
8 FAQ
317