Gpm Hydraulic Tester (Pressure And Flow) - Toro Groundsmaster 360 Service Manual

15 GPM Hydraulic Tester Kit (Pressure and Flow) (continued)

40 GPM Hydraulic Tester (Pressure and Flow)

Hydraulic System: Special Tools
3. Pressure Gauge: A glycerine filled pressure gauge 0 to 34,500 kPa (0 to
5,000 psi) to provide operating circuit pressure.
4. Flow Meter: This meter measures the actual fluid flow in the operating circuit
with a gauge rated at 5 to 55 L/minute (1 to 15 gallons/minute).
5. Outlet Hose: A hose from the outlet side of the hydraulic tester that connects
to the hydraulic system circuit.
6. Fittings: An assortment of hydraulic fittings are included with this kit.
g035151
Toro Part No. AT40002
Use this tester to test the hydraulic circuits and components for flow and pressure
capacities as recommended in
tester includes the following:
1. Load Valve: Turn the valve to restrict the flow to create a simulated working
load in the circuit.
2. Pressure Gauge: A glycerine filled pressure gauge 0 to 35,000 kPa (0 to
5,000 psi) to provide operating circuit pressure.
3. Flow Meter: This meter measures the actual fluid flow in the operating circuit
with a gauge rated at 20 to 150 L/minute (4 to 40 gallons/minute).
Note: This tester does not include the hoses; refer to
4–29).
Figure 34
Testing the Hydraulic System (page
Page 4–28
4–39). This
Hydraulic Hose Kit (page
Groundsmaster 360
16225SL Rev C