Servicing The Crosstrax Traction Manifold Assembly - Toro Groundsmaster 360 Service Manual

4-wheel drive models with yanmar engine

Hide thumbs Also See for Groundsmaster 360:

Table of Contents

Servicing the CrossTrax Traction Manifold Assembly

Pilot directional valve (PD1 and

Manifold block

Orifice (0.040) (OR3 and OR4)

Hydraulic System: Service and Repairs

Orifice (0.090) (OR1 and OR2)

Zero-leak hex plug

Check valve (CV1 and CV2)

Note: The ports on the CrossTrax traction manifold assembly are marked for

easy identification of the components. Example: PD1 is the location for the pilot

directional valve PD1 and OR1 is the location for a 0.090 orifice. Refer to the

Hydraulic Schematic in

Appendix A (page

A–1)—Foldout Drawings.

Relief valve (CRV)

Groundsmaster 360

16225SL Rev C

Table of Contents