Toro Groundsmaster 360 Service Manual page 373

Removing the Brake Cable (continued)
Groundsmaster 360
16225SL Rev C
4. Disconnect the brake cable (item 1 in
machine as follows:
g037242
1. Brake cable
2. Flange nut/washer
3. Brake cable bracket
4. Brake actuator lever
g037241
1. Brake cable
2. Flange nut/washer
A. Loosen 1 of the flange nuts (item 2 in
cable to the operator platform bracket.
B. Separate the cable from the bracket.
C. Remove the cable end from the cable yoke.
5. Record the location of cable ties and routing of the brake cable for assembly
purposes. Remove the brake cable from the machine.
6. Disassemble any additional brake linkage components as necessary. Repair
or replace the components that are worn or damaged.
Figure
Figure 266
5. Clevis pin
6. Return spring
7. Bracket notch
Figure 267
3. Platform bracket
4. Cable yoke
Figure
Page 6–21
267) from the front of the
267) that secures the brake
Chassis: Service and Repairs