Diagnostics Screen - Toro Groundsmaster 360 Service Manual

Diagnostics Screen

Groundsmaster 360
16225SL Rev C
The diagnostics screen
the current state of the Toro Electronic Controller (TEC) inputs, qualifiers, and
outputs required to allow the operation to proceed. The diagnostics screen
should be used to troubleshoot machine operation issues, and check that
necessary components and circuit wiring are functioning correctly (refer to
Troubleshooting (page
(highlight) the operation to be viewed, press the down button (as indicated by
the at the bottom of the screen).
To return to the previous screen, press the menu/back button (as indicated by
the at the bottom of the screen).
For each of the diagnostics screen items, inputs, qualifiers, and outputs are
identified. The diagnostics screen includes the following:
Decks identifies the machine requirements necessary to allow the cutting deck
to raise and lower.
Inputs
Lower Input
Raise Input
Steer Mode indicates the inputs, qualifiers, and outputs for switching between
2-wheel steer and 4-wheel steer.
Inputs
4 Wheel Steer
PTO identifies the requirements necessary to allow the TEC to engage the
cutting deck.
Inputs
Input
(Figure 178) lists a variety of machine operations and
5–28)). To scroll through the list of operations and select
Qualifiers
Seat
Parking brake Off
Qualifiers
Steering on Center
Qualifiers
Seat
Left Wing Down
Right Wing Down
Page 5–21
Outputs
Deck Raise (SV1)
Deck Float (SV2)
Outputs
4 WS Enable (SV1)
Steer Mode Lamp
Outputs
Out
Electrical System: InfoCenter Display