Toro Groundsmaster 360 Service Manual page 451

Removing the Roof Assembly (continued)
Installing the Roof Assembly
Groundsmaster 360
16225SL Rev C
2. Release the 4 swell latches and lift the condenser screen (item 4 in
321) from the roof assembly.
3. Remove the 16 flange-head screws (item 2 in
the condenser seals (items 3, 5, 6, and 7) to the roof and air conditioning
condenser assembly.
4. Remove the 22 shoulder screws (item 8 in
22 flange nuts that secure the roof and cab straps to the headliner.
5. Carefully lift the roof from the headliner and cab.
6. Inspect all the roof seals for wear or damage. Replace the roof seals as
necessary.
1. Ensure that all the components in the headliner are installed and secure.
2. Position the roof onto the headliner. Ensure that all the roof mounting holes
are correctly aligned with the headliner and air conditioning condenser
assembly.
3. Secure the roof to the headliner with the 22 shoulder screws (item 8 in
321), 22 flat washers, cab straps, and 22 flange nuts that were removed.
4. Secure the condenser seals to the roof and air conditioning condenser
assembly with the 16 flange-head screws that were removed.
5. Install and secure the condenser screen to the roof assembly with the 4
swell latches.
Figure
Page 8–11
Figure
Figure 321) that secure
321), 22 flat washers, and
Operator Cab: Service and Repairs
Figure