Servicing The Steering Selector Manifold Assembly - Toro Groundsmaster 360 Service Manual

Servicing the Steering Selector Manifold Assembly

g036316
1. Manifold block
2. Solenoid valve
Servicing the Steering Selector Manifold Assembly Cartridge Valve
Groundsmaster 360
16225SL Rev C
Note: The ports on the steering selector manifold assembly are marked for easy
identification of the components. Refer to the Hydraulic Schematic in
(page A–1)—Foldout Drawings to identify the function of the hydraulic lines and
cartridge valves at each manifold port.
Before opening the hydraulic system, operate all the hydraulic
controls to release all the pressure in the system and avoid injury
from pressurized hydraulic fluid; refer to
the Hydraulic System (page
For the cartridge valve service procedures, refer to
Valves in a Control Manifold (page 4–134)
selector manifold assembly cartridge valve and solenoid nut installation torque.
Figure 150
3. Solenoid coil
4. Nut
WARNING
4–5).
. Refer to
Page 4–159
Appendix A
Releasing Pressure from
Servicing the Cartridge
Figure 150 for steering
Hydraulic System: Service and Repairs