Test Procedure (continued)
Groundsmaster 360
16225SL Rev C
17. The flow should be less than 5.7 L/minute (1.5 gallons/minute) for the tested
wheel motor. If the specification is not met, repair or replace the wheel motor.
18. Release pressure from the hydraulic system; refer to
from the Hydraulic System (page
19. Disconnect the tester from the pump outlet fitting and hydraulic hose, and
connect the pump outlet and balancing hoses to the transmission fittings.
20. If other wheel motor requires testing, complete the steps
other motor.
4–5).
Page 4–55
Hydraulic System: Testing the Hydraulic System
Releasing Pressure
8
to
19
for the