Servicing The Quick Attach System (Qas) Control Manifolds (Optional Kit) - Toro Groundsmaster 360 Service Manual

Servicing the Quick Attach System (QAS) Control Manifolds
(Optional Kit)
g037780
1. QAS angle control manifold
2. Orifice (0.080) (port C3)
3. Check valve (ports CV1 and CV2)
4. Plug
5. 90° hydraulic fitting (2 used)
Hydraulic System: Service and Repairs
6. Relief valve (ports RV1 and RV2)
7. Solenoid valve (port S3)
8. Solenoid valve (port S1)
9. Solenoid valve (port S2)
10. Solenoid coil
Note: The ports on the QAS control and poppet valve manifolds are marked
for easy identification of the components. Refer to the Hydraulic Schematic
in Appendix A (page A–1)—Foldout Drawings to identify the function of the
hydraulic lines and cartridge valves at each of the manifold ports.
Figure 157
11.
12.
13.
14.
Page 4–174
Coil spacer
Solenoid coil
Nut
Orifice (0.046) (port C4)
Groundsmaster 360
16225SL Rev C