Toro Groundsmaster 360 Service Manual page 56

Removing the Engine (continued)
Installing the Engine
Diesel Engine: Service and Repairs
18. Remove the 9 screws (items 18 and 19 in
secure the flywheel housing to the engine.
19. Remove the flange nuts (item 5 in
that secure the engine and flywheel housing to the 4 engine mounts.
When removing the engine ensure that you do not damage the
engine, flywheel housing, fuel hoses, hydraulic lines, electrical
harness or other parts. Also, ensure that the transmission does
not shift during engine removal.
20. Support the transmission to prevent it from moving during engine removal.
Use 1 person to operate the lift or hoist while the other person
guides the engine from the machine.
21. Slide the engine rearward to separate it from the transmission input shaft.
Carefully raise the engine from the machine.
22. Inspect the 4 rubber engine mounts for the wear or damage. Replace if
necessary.
23. If necessary, remove the 8 bolts (item 24 in
coupling to the engine, and remove the flywheel coupling from the engine.
24. Plug and cap all the engine openings.
Ensure that all parts removed from the engine during maintenance
or overhaul are correctly installed on the engine.
1. Apply anti-seize lubricant to the splines of the transmission input shaft.
2. If removed, install the flywheel coupling to the engine with the 8 bolts (item
24 in Figure 14), apply red gel threadlocker to the bolts, and torque the bolts
to 25.8 to 29.8 N·m (19 to 22 ft-lb).
3. If the 2 mounts (items 3 and 6 in
mounts to the engine with the 8 bolts and 8 lock washers; torque the bolts
to 32.5 to 56.9 N·m (24 to 42 ft-lb).
The engine is very heavy, and a hoist not rated for the weight of the
engine may fail, causing possible injury and damage to the engine.
Use hoist equipment rated to lift the engine, which is approximately
188 kg (414 lb).
Figure
Figure 14), snubbing washers, and bolts
IMPORTANT
CAUTION
Figure
IMPORTANT
Figure 14) were removed, install the 2
CAUTION
Page 3–24
14) and 9 lock washers that
14) that secure the flywheel
Groundsmaster 360
16225SL Rev C