Toro Groundsmaster 360 Service Manual page 176

Assembling the Transmission (continued)
Hydraulic System: Service and Repairs
g033458
1. PTO shaft assembly
2. Pump housing
13. Install the PTO shaft assembly into the transmission pump housing.
Note: Ensure that the tabs on the friction plates are placed in the housing
grooves.
g033440
1. Right pump shaft
2. Left pump shaft
14. If the shafts were disassembled, install the gear and 2 bearings onto the
input shaft, right pump shaft and/or left pump shaft.
Note: Ensure that the bearings are pressed fully to the shaft shoulder.
15. Lubricate the seal rings and install the seal ring onto the right and left pump
shafts.
Figure 113
3. Friction plate tabs
4. Housing groove
Figure 114
3. Input shaft
4. Seal ring
Page 4–118 Groundsmaster 360
16225SL Rev C