Service Screen (continued)
Electrical System: InfoCenter Display
that a stationary DPF regeneration is necessary, an advisory will occur on the
InfoCenter Display.
Move the machine to a well ventilated area and initiate a stationary DPF
regeneration by pressing the left/right button (as indicated by the
bottom of the screen) and then pressing the down button (as indicated by the
Yes or
at the bottom of the screen). Additional information can be found in
the Yanmar Engine Service Manual.
DPF Ash (PIN required) DPF ash is the level of ash accumulated in the DPF
(diesel-particulate filter) on the machines with Yanmar diesel engines. Ash is the
byproduct of performing numerous regeneration operations. When there is too
much ash build up in the filter, it has to either be serviced or replaced.
Page 5–20
at the
Groundsmaster 360
16225SL Rev C