Roof Assembly - Toro Groundsmaster 360 Service Manual

Roof Assembly

g036614
1. Roof panel
2. Flange-head screw (16 each)
3. Right condenser seal
4. Condenser screen
5. Front condenser seal
Removing the Roof Assembly
Operator Cab: Service and Repairs
6. Rear condenser seal
7. Left condenser seal
8. Shoulder screw (22 each)
9. Flat washer (22 each)
10. Condenser assembly
Get access to the heater core and air conditioning components by removing
the roof panel.
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
Figure 321
11.
12.
13.
14.
Page 8–10
Front/rear cab strap (2 each)
Flange nut (22 each)
Headliner assembly
Side cab strap (2 each)
Groundsmaster 360
16225SL Rev C