Toro Groundsmaster 360 Service Manual page 170

Disassembling the Transmission (continued)
Hydraulic System: Service and Repairs
g033446
1. Bearing
2. PTO gear
60. If necessary, remove the 2 bearings from the PTO gear and discard the
bearings that were removed.
61. Remove the retaining ring from the groove in the PTO gear bore.
g033447
1. Socket-head plug
2. Hex plug
62. Remove the socket-head plug and hex plug from the transmission pump
housing.
63. Remove and discard the O-rings from the plugs.
Figure 101
3. Retaining ring
Figure 102
3. Pump housing
Page 4–112 Groundsmaster 360
16225SL Rev C