Toro Groundsmaster 360 Service Manual page 459

Installing the Air Conditioning Condenser Assembly
Groundsmaster 360
16225SL Rev C
1. If the condenser assembly was disassembled, do as follows:
A. To properly seal the condenser core, apply RTV sealant to all mating
surfaces of walls, lower legs, and condenser core before assembly.
B. Assemble all the condenser assembly components as shown in
328.
Note: Ensure that the strip and edge seals are in good condition after
assembly.
2. Carefully lower the air conditioning condenser assembly through the
headliner and onto the cab frame.
3. Secure the air conditioning condenser assembly to the cab frame with the 4
flange nuts.
4. Remove the caps that were placed on the hoses and fittings during the
removal process. Use the labels that you attached during removal to correctly
connect the hoses to the condenser core.
5. Secure the condenser fan assembly to the machine; refer to
Conditioning Condenser Fan Assembly (page
6. Ensure that all the machine air conditioning components are installed and
secure.
7. Have a certified air conditioning service technician evacuate the air
conditioning system completely, properly recharge the system with R134a
refrigerant, and perform the leak test on the system.
Note: The capacity of the air conditioning system is 1.55 kg (3.43 lb) of
R134a refrigerant.
8. When you complete the service in the cab headliner, secure the roof panel to
the top of the cab; refer to Installing the Roof Assembly (page
Page 8–19
Figure
Installing the Air
8–16).
8–11).
Operator Cab: Service and Repairs