Toro Groundsmaster 360 Service Manual page 50

Removing the Fuel Tank (continued)
Installing the Fuel Tank
Diesel Engine: Service and Repairs
g037435
1. Fuel supply hose
2. Vent hose
7. Remove the 2 button-head screws (item 28 in
cover plate to the fuel tank, and remove the cover plate.
Note: Before removing the fuel hoses from the fuel tank fittings, label the
hoses for assembly purposes.
8. Disconnect the fuel supply hose (item 1 in
return hose from fittings in the top of the fuel tank.
9. Cover or plug the fuel hoses and fuel filter fittings openings to prevent
contamination.
10. Remove the 2 flange nuts from threaded ends of the tank bracket (item 29 in
Figure 12), and remove the tank bracket.
11. Loosen and remove the screw (item 30 in
washer, and flange nut that secure the rear of the fuel tank to the frame.
12. Loosen and remove the screw (item 26 in
washer, rubber washer, and flange nut that secure the front of the fuel tank
to the frame.
13. Locate and retain the spacer and tube spacer (items 24 and 22 in
12) from the fuel tank.
14. Lift the fuel tank from the machine.
Note: For information regarding the fuel pump testing; refer to
(page 5–93).
Note: Refer to the Operator's Manual for the fuel/water separator and fuel filter
service information.
1. If the elbow fittings (item 6 in
separator, apply thread sealant to the fittings before installing.
2. Align the fuel tank to the machine.
3. Secure the fuel tank to the frame as follows:
A. Secure the rear of the fuel tank with the tube spacer (item 22 in
12), screw, rubber washer, plain washer, and flange nut.
B. Secure the front of the fuel tank with the spacer (item 24 in
screw, flat washer, plain washer, rubber washer, and flange nut.
Note: Do not overtighten the flange nuts on the tank bracket.
Figure 13
3. Fuel return hose
4. Fuel gauge
Figure
Figure
Figure
Figure 12) were removed from the fuel/water
Page 3–18
Figure 12) that secure the
13), vent hose, and fuel
12), rubber washer, plain
12), flat washer, plain
Figure
Fuel Pump
Figure
Figure
Groundsmaster 360
16225SL Rev C
12),