Toro Groundsmaster 360 Service Manual page 312

Testing the Fan Speed Switch (continued)
Electrical System: Testing the Electrical Components
Circuit Logic Table
Switch Position
O
FF
L
OW
M
EDIUM
H
IGH
6. Replace the fan speed switch if testing determines that the switch is
damaged.
7. If the fan speed switch testing is correct and a circuit problem still exists,
check the wire harnesses; refer to Electrical Schematics and Wire Harness
Drawings and Diagrams in
8. After you complete the testing, connect the machine wire harness connector
to the switch and install the air/heat panel.
9. Install the cab roof; refer to
Appendix A (page
Roof Assembly (page
Page 5–76
Closed Circuits
L+H
B+C+L
B+C+M
B+C+H
A–1)-Foldout Drawings.
8–10).
Groundsmaster 360
16225SL Rev C