Toro Groundsmaster 360 Service Manual page 306

Testing the Seat Switch (continued)
Electrical System: Testing the Electrical Components
the seat cushion approaches the bottom of its travel indicating that the
seat switch is functioning.
To prevent injury, do not attempt to reach the switch through
openings in the seat plate.
If seat switch service is necessary, remove the seat from the seat
plate to access the switch.
8. Replace the seat switch if testing determines that the switch is damaged; refer
to Servicing the Operator Seat (Machines without Operator Cab) (page 6–62)
and Servicing the Operator Seat (Machines with Operator Cab) (page
9. If the seat switch testing is correct and a circuit problem still exists, check the
machine wire harness; refer to the Electrical Schematics and Wire Harness
Drawings/Diagrams in
10. After you complete the seat switch testing, connect the machine wire harness
connector to the seat switch electrical lead. Lower the seat assembly. Check
the operation of the seat switch.
WARNING
Appendix A (page A–1)—Foldout Drawings.
Page 5–70
6–65).
Groundsmaster 360
16225SL Rev C